The VS360 connects to industrial machinery via Modbus (serial), Modbus TCP/IP Ethernet, EtherNet/IP, CANbus (J1939) or I/O and sends data to the cloud server via Ethernet or cellular communications. This VS360 will make it easy to collect data from a remote system, and securely get to cloud server. Data will be stored securely, with backup and redundancy of databases. It assures you that you can access your data when you need it. You can access the data through the web interface, with tools to build presentation pages using dashboard widgets. It makes it easy for you to focus on your business.
The VS360 is an advanced SCADA Server that can handle many parameters both for logging and alarms with built-in GPS device to take control of the remote system’s position. By having communication redundancy data is garuanteed to be stored on our cloud server. The VS360 supports mobile communication for 4G LTE, 3G and 2G bands. The VS360 supports “Remote Access” functionality. This means that users can open up a secure connection to remote machinery and configure or operate it from any location using standard software applications. Remote access provides a secure data tunnel to the remotely located equipment.
For example, with a VS360 connected to a PLC, it is possible to perform remote debugging or programming of the PLC from any location, using the same PLC configuration software as usual. Configuration of the VS360 is done directly online via the cloud server. The cloud server is where your data can be monitored, analyzed or further processed (alarm routing, RSS, etc). The VS360 is a breeze to setup, No IT expertise required, No firewall issues, No VPN required, No static IP needed.
Brochure for Simplex Pump Systems (PDF 3.26 MB)
Brochure for Multiplex Pump Systems (PDF 3.45 MB)
Configuration Software (ZIP 0.98 MB) (For firmware version up to 1.6)
USB Driver (ZIP/CAB 12KB)
Mobile Network Bands
Serial port #1
Serial port #2
Serial baud rate
Type of housing
Wallmount / DIN rail
Ordering Part Number