SCADA and Web Server Accessories

Sensors, Antennas, Mounting Kits for your SCADA and Web Servers

Ultrasonic Tank Sensor

The Ultrasonic Tank Sensor is an accessory to the VirtualSCADA® remote management solution. It allows you to see the exact content level of your tanks in a regular web browser. You also get immediate alarms if the level is too low or if it drops too fast (theft or leakage).

  • Compatible with SCADA Servers VS350, VS250 and VS220
  • Ultrasonic sensor with (0.25 - 6.5 ft (80 - 2000 mm) range
  • Built-in temperature and vibration compensation
  • 0.02" (0,4 mm) resolution (99,9% accuracy)
  • Install up to 300ft (100m) from Netbiter gateways
  • No calibration needed
  • Tamper proof + theft detection (built-in)
Ordering Part Number: VS1616

GPS Tool Kit

Keep track of your fleet of remote units. Geofencing with notification informs when the remote unit moves outside a preferred geographical area. Use Route tracking to visualize the actual route of the remote unit.

  • Compatible with SCADA Servers VS250, VS220 and VS1 Web Servers
  • Built-in patch antenna
  • Fast TTFF and low power consumption with protection against reverse polarity voltage
  • Interference filter to major VHF channels of marine radar
  • WAAS compliant with EGNOS support
  • Perfect Static Drift for both of speed and course
  • Magnetic Declination compensation
  • RS-232 support
Ordering Part Number: VS-E019

SCADA Server Antennas

GSM antenna (stub, straight)

Quadband antenna (Stub, straight, SMA connector)

Ordering Part Number: VS-E020

GSM antenna (stub, right angle)

Quadband antenna, (stub, right angle, SMA connector)

Ordering Part Number: VS-E021

GSM antenna (magnetic)

Quadband antenna, cable length 15ft (5m) (magnetic foot, SMA connector)

Ordering Part Number: VS-E022

GSM antenna (magnetic)

GPS antenna with cable 15ft (15m) (magnetic foot, SMA connector)

Ordering Part Number: VS-GPS

Antenna Extension Cables

10ft (3m) Extension Cable

SMA Connectors

Ordering Part Number: VS-E023

15ft (5m) Extension Cable

SMA Connectors

Ordering Part Number: VS-E024

30ft (10m) Extension Cable

SMA Connectors

Ordering Part Number: VS-E025

Mounting Kits

DIN-rail mounting kit

for SCADA Servers V220, VS350

Ordering Part Number: VS-M008

Network Switches

5 Port Industrial Network Switch

for SCADA Servers V250, VS350

  • Rugged construction and extended operating temperature ranges make the device ideal for harsh workplace and industrial conditions
  • Din-Rail Mountable for simple installation into equipment racks and cabinets
  • Unmanaged Ethernet switch with integrated port auto-negotiation features make it easy to use and saves configuration time
  • Device powers from the Terminal Block power connector
  • Din-Rail mounting
  • Store-and-forward switching mechanism
  • Support 10BaseT/100BaseTX and Full-Duplex/Half-Duplex Auto-negotiation function
  • Supports IEEE802.3/802.3u/802.3X

Network Cables

Industrial Ethernet Cable 6ft (2m)

for SCADA Servers V250, VS350

Power Supply

  • Compact size, high efficiency and DIN rail mounting
  • Universal input 100-240VAC
  • Voltage adjustment range 24-28V
  • Output current 2.50-2.10A
  • Input noise filter
  • 60°C rated provides full power/no derating required
  • Short circuit, overvoltage & overload protection
  • Voltage stabilizer for inrush demands of industrial applications
  • Parallel operation capable
  • DC ON green LED status indicator
  • Connector wire size AWG 26-12
  • UL listed Class 1, Div 2
  • UL/cUL/CE
  • UL 1310 Class 2

Ordering Part Number: VS-PWR2460